聚碳酸酯聚氨酯弹性体的模拟生物老化性能的研究

研究了聚碳酸酯聚氨酯的水解剂，氧化，钙化等生物老化性能，并与聚醚聚氨酯样品做了比较，结果表明，胺扩链样品具有较好的耐水解性能，聚碳酸酯氨酯的抗氧化性能优于聚醚聚氨酯，同了聚醚氨酯一样，聚碳酸酯聚氨酯同样受钙的影响，含水氯化钙对聚碳酸酯聚氨酯的相结构产生影响，并对弹性具有增强作用。     

On the Ramsey numbers R(3, 8) and R(3, 9)

Using methods developed by Graver and Yackel, and various computer algorithms, we show that 28 ≤ R(3, 8) ≤ 29, and R(3, 9) = 36, where R(k, l) is the classical Ramsey number for 2-coloring the edges of a complete graph.     

Spectrophotometric Determination of Palladium with Sodium Ethylene-Bis-Selendglycollate

Abstract

SUMMARY

Palladium was determined spectrophotometrically with sodium ethylene-bis-selenoglycollate in acid medium. The system obeys Beer' law in the range 0.25–0, 3 5 μg.ml^?1 and the molar absorptivity is 2.4 × 10⁴ 1. mol^?1 .cm^?1. Determination of palladium in the presence of many ions is reported.

In spite of the fact that selenium compounds have rarely been used as organic analytical reagents and one finds many palladium determination methods in the literature, this paper fits into the general Purpose reported before ^1,2 :systematic comparison of organic sulphur, sellenium and tellurium compounds as analytical reagents in agreement with propositions made some years agp ^3,4

In previous work⁵ the behaviour of the ethylseleno glycollic (L₁), selenodiglycollic (L₂) and ethylene-bis-selenoglycollic (L₃) anions in acidic solutions of some “soft”, “borderline” and “hard” cations was studied.

The results obtained for Pd(II) afforded evidences that its determination could be run with the three mentioned ligands.

Nevertheless, L₃ was selected because it provides the most sensitive signal and its synthesis is very simple and its overall yield is excellent⁶

From the qualitative study⁵ the foreseen selectivity could present some restrictions, but there is little doubt about the usefulness of the method that will be proposed, in various schemes of determination. Similar comments Beamish have been made about EDTA method for Pd(II) determination⁸     

宽温度范围光纤传输性能温度适应性试验与评价

通过高低温湿热交变试验箱模拟外界温度环境，利用OTDR和CD300色散仪监测光纤传输性能随温度的变化情况，对相同工艺生产的同类型的不同批次的单模光纤进行温度循环试验。试验表明：在－60℃～140℃宽温度范围内，光纤的传输性能均随温度发生波动——在1310nm和1550nm波长处光纤温度附加衰减不超过0.05dB/km；在1550nm处光纤的色散系数随温度升高而降低；PMD随温度的升高有所增加。在该试验的基础上，利用质量管理中的“3σ”控制原理，以现有通信系统标准作为判据，讨论了温度变化时光纤传输性能对通信系统的适应性，推断出在－60℃～140℃温度范围，G.652光纤的衰减、色散和PMD性能均满足10Gbit/s以下的通信系统使用；对于高于10Gbit/s的高速通信系统，应采用适当的措施，尽可能减小拉丝过程中光纤的PMD，这样才能保证PMD指标完全满足高速通信系统要求。     

MgO/HZSM-5中MgO分散状态和催化性能的关系

以硝酸镁、醋酸镁为前身物,通过浸渍法制备了不同系列MgO/ HZSM-5催化剂,用XRD、XPS方法研究了MgO在HZSM-5上的分散状态,用NH3-TPD方法考察了催化剂的酸性,用常压连续流动微型反应装置考察MgO/ HZSM-5在甲苯甲醇烷基化反应中的催化性能.发现前身物不同,MgO在HZSM-5上的分散状态也不同,催化剂的活性和选择性与MgO分散状态密切相关.MgO负载量相同时,在以硝酸镁为前身物制备的催化剂中,MgO在HZSM-5内外表面均有分散,催化剂的对位选择性较高,而活性较低;在以醋酸镁为前身物制备的催化剂中,MgO较多分布在HZSM-5外表面,催化剂的活性较高,但选择性较低.使用醋酸镁为前身物,通过二次浸渍和高温水汽处理,适当改变MgO在分子筛表面的分布并使孔道窄化,可在活性降低较少的情况下显著提高催化剂对二甲苯选择性.     

The analysis of solutions containing mixtures of linear sodium phosphates

A new method for analysis of sodium ortho-, pyro-, and triphosphate is reported. This procedure consists of the measurement of three values which permit a simultaneous solution of three independent equations, yielding the relative amounts of linear phosphates present in the mixture. The measured quantities were: 1) pyrophosphate, gravimetrically determined as zinc pyrophosphate, reprecipitated at 19° and at a pH of 4.0 – 4.5, 2) silver phosphate, determined by a conductance titration at 12°, of standardized silver nitrate solution, and 3) total phosphate, determined after complete hydrolysis to orthophosphate in hot acid solution.     

Allinger's gauche hydrogen hypothesis as tested by an alternative force field model

Allinger's hypothesis that gauche hydrogen, rather than gauche methyl interactions are mainly responsible for conformational equilibria was tested by molecular mechanics calculations using the Engler force field model. For the gauche-anti conformational energy of n-butane, effective cancellation among non-bonded in teractions involving the methyl groups results in the gauche hydrogen interactions across the central C-C bond as the single largest contribution to the energy difference. However, the contribution of this interaction is only one third of the 0.9 kcal difference. For 2,3-dimethylbutane, strain analysis of the gauche-anti conformational energy contributions reveals that geminal and gauche CH₃/CH₃ interactions dominate over the gauche hydrogen interaction Similar analyses for several monosubstituted cyclohexanes confirm that “across-the-ring” interactions. between axial substituents and syn -axial hydrogen atoms are still largely responsible for the instability of the axial relative to the equatorial conformer. In disagreement with Allinger's proposal, the “equatorial hydrogen effect” is found to contribute only a minor amount to the conformational energy difference. Allinger's hypothesis is concluded to be force field dependent, and not to have general validity.     

离子交换树脂催化合成丙烯酸—β—羟乙酯的动力学研究

对732~#强酸型离子交换树脂催化合成丙烯酸-β-羟乙酯进行了动力学研究。测定并推算出反应级数、反应速率常数及活化能,提出了反应机理。     

酯交换反应对PBT／PC共混体系相容性及热行为的影响

研究了ＰＢＴ、ＰＣ间的酯交换反应及共混体系的相容性和热行为。ＩＲ结果表明，在熔融共混过程中ＰＢＴ、ＰＣ间发生了酯交换反应，磷酸三苯酯可在一定程度上抑制酯交换反应的进行，但是当温度过高或共混时间过长时，ＴＰＰ的作用减弱甚至消失。     

Mechanism of electrochemical reduction of oxamide analytical applications

Oxamide is electrochemically reduced at mercury electrodes between pH 5.6 and 11.6. The overall mechanism proceeds by an initial 2e reduction of the 1,2-carbonyl groups of oxamide to give a dianion. This then protonates, rearranges, and loses ammonia to glyoxylamide, which is reduced in a further 2e/2H⁺ reaction giving glycolamide as the ultimate product. The reaction thus proceeds by a typical e.c.e. mechanism. The overall homogeneous rate contant for the chemical reaction(s) interposed between the two charge-transfer steps was measured by peak voltammetric, potentiostatic and d.c. polarographic methods. The d.c. polarographic wave of oxamide between pH 5.6 and 11 provides the basis for a very simple analytical method for the determination of oxamide.